CS115
A number of years ago, Stephen Bloom taught CS115 at Stevens Institute of Technology. Any one familiar with his teaching style is well aware of how "animated" he can be in class. In this particular course, one student made some recordings of the lectures.

Copies circulated around campus, but over time these recordings became harder to find. In an effort to preserve a piece of history, I present to you The Bloom MP3s.

[/musings] [permanent link]

Happy Birthday

Last night, as an end to my 30th birthday weekend, I went to see The Birthday Massacre in Teaneck. The show was at the Mexicali Live which is a rather small, intimate venue with full table service for dining, and a bar with some really good microbrews on tap.

The first act was A Verbal Equinox. I thought they were pretty good, especially considering they all seemed to be still in high school. Their set was pretty tight, with mostly original songs and a My Chemical Romance cover. Frankly, I think they did the MCR song just as well, if not better, than MCR. They definitely had a good rhythm section.

The next band, who shall remain nameless, was described by some as "Armenian Industrial." I thought the music was good, but I wished the singer would just shut up. No singing, no talking to the crowd. Just. Shut. Up. Their set would have been awesome as an instrumental.

During their set they had two "gothy cheerleaders" on stage. It turned out that one of them was my friend's niece. Kinda random.

After their set, I ran into a couple of the kids from the first band and talked to them a bit. I told them I liked what I heard and they thanked me and gave me a CD-R labeled with sharpie containing their first recorded single. Something about that is just awesome.

The Birthday Massacre was great. They played a good mix including songs from every album.

If you care (or even if you don't), their set list follows:

• Pins and Needles
• Control
• Happy Birthday
• Forever
• Burn Away
• Shallow Grave
• Always
• Weekend
• Video kid
• Blue
• Looking Glass
• Lover's End
• In the Dark
• Horror Show
• Red Stars
-- Encore --
• Sleep Walking
• Midnight

They didn't play my favorite song, "Broken," but I was not disappointed in the set at all. After they finished, Rainbow was on stage for a bit talking with people from the crowd. I told him it was a great show and asked if they'd be playing "Broken" at tonight's show with Dir En Grey. He said it wouldn't be in the set, but he loves that song and they'd rehearse it for their next tour.

A rather blurry picture of The Birthday Massacre from the show.

[/musings] [permanent link]

Happy Birthday

Last night, as an end to my 30th birthday weekend, I went to see The Birthday Massacre in Teaneck. The show was at the Mexicali Live which is a rather small, intimate venue with full table service for dining, and a bar with some really good microbrews on tap.

The first act was A Verbal Equinox. I thought they were pretty good, especially considering they all seemed to be still in high school. Their set was pretty tight, with mostly original songs and a My Chemical Romance cover. Frankly, I think they did the MCR song just as well, if not better, than MCR. They definitely had a good rhythm section.

The next band, who shall remain nameless, was described by some as "Armenian Industrial." I thought the music was good, but I wished the singer would just shut up. No singing, no talking to the crowd. Just. Shut. Up. Their set would have been awesome as an instrumental.

During their set they had two "gothy cheerleaders" on stage. It turned out that one of them was my friend's niece. Kinda random.

After their set, I ran into a couple of the kids from the first band and talked to them a bit. I told them I liked what I heard and they thanked me and gave me a CD-R labeled with sharpie containing their first recorded single. Something about that is just awesome.

The Birthday Massacre was great. They played a good mix including songs from every album.

If you care (or even if you don't), their set list follows:

• Pins and Needles
• Control
• Happy Birthday
• Forever
• Burn Away
• Shallow Grave
• Always
• Weekend
• Video kid
• Blue
• Looking Glass
• Lover's End
• In the Dark
• Horror Show
• Red Stars
-- Encore --
• Sleep Walking
• Midnight

They didn't play my favorite song, "Broken," but I was not disappointed in the set at all. After they finished, Rainbow was on stage for a bit talking with people from the crowd. I told him it was a great show and asked if they'd be playing "Broken" at tonight's show with Dir En Grey. He said it wouldn't be in the set, but he loves that song and they'd rehearse it for their next tour.

A rather blurry picture of The Birthday Massacre from the show.

[/tbm] [permanent link]

Product Review: ASICS Cumulus-10
This is the second installment of my running product reviews. Last time I said I'd discuss my "current running shoe" but my training has turned me into a liar. I'm still going to discuss the ASICS Cumulus-10, but it is no longer my current running shoe.

At this point, the Cumulus-10 can still be found, although supplies are limited. I recently tried to purchase a second pair of these and was unable to find them in my size. I could have had a 9.5 or a 12, but not the 10.5 I needed.

When the Nike Tailwinds no longer provided adequate cushioning, I had to find a new shoe, one that would work for a lighter runner. After reading reviews online and in magazines, particularly Runner's World, I went over to Fleet Feet in Montclair and talked to the sales staff there.

After trying on a few pairs, I decided on the Cumulus-10 but wanted to wait until after the Brooklyn Half Marathon, a week away, before breaking in new shoes. This is not what happened. Because of the lack of cushioning in the Tailwinds, I ended up with horrible shin splints during my lunch time run the day before Brooklyn. I called up fleet feet, asked them to hold a pair of the Cumulus-10s for me and I picked them up that evening. I ran in them for the first time the next morning in the Brooklyn Half.

Those shoes were amazing. They were soft enough to provide the compression needed for good cushioning at my weight. And while they were soft, they weren't mushy either. The ASICS GEL cushioning system is in place in both the heel and the forefoot, providing ample shock absorption for heel strikes and mid- to fore-foot strikes.

The toe box was slightly narrow, but starting the laces one hole up from the bottom provided enough extra space while keeping my foot firmly in place.

The sole in the forefoot is wide; wider than the sole in the Tailwinds. This provides support for the foot during the toe-off portion of the stride.

The Cumulus-10 served me well until I had put just under 600 miles on them. At that point the cushioning was worn down and not as effective as it once was. I retired them about a week after the NYC Half Marathon in August giving me about 12 weeks worth of running. In actuality, I should have retired them after about 10 weeks.

I recommend the ASICS Cumulus-10 for lighter runners with normal to low arches. Left over stock of the Cumulus-10 can be found at EastBay's website for $69.99 (both men's and women's), although many sizes are unavailable at this time.

Next time, we'll discuss my current running shoe, the ASICS Cumulus-11. I've been slacking a bit so I only have about 250 miles on this pair so far. Hopefully I'll post the review before I hit 500 miles and retire these.

[/running/reviews] [permanent link]

On sunday I ran...
27.22 miles because I felt like it.

I woke up Sunday morning, ran some errands, and then met a friend for a run. While I was waiting for him, I ran a one mile warm-up. Then he and I set out and ran a half marathon.

I felt pretty good afterward, so a little while later I set out to do another 10K. That 10K turned into an 8.4 mile hill work out.

I realized I was only about four miles shy of a marathon at that point and I still felt really good. After a short break I went out one more time. Four and a half miles later, I was back home and had logged the most miles in a single day that I had ever done, breaking my previous record by a mile.

It felt absolutely amazing.

Can every body feel like I do? Can't you can't you trip like I do?

[/running] [permanent link]

Excluding directories while using pax(1)
My primary disk is failing. There are large segments that are generating low level IO errors during read or write operations. Most of the files written to the bad area were under /usr/ports/ where the FreeBSD Ports collection is installed. A few files were under the web server's root.

Figuring I'd take care of things prior to the disk actually failing to the point of it being irrecoverable, I purchased a new disk early. I installed it, partitioned it, and formatted it.

To copy the data over, ignoring the areas that were causing the IO errors, I used mv to "move" the files from the web root under /usr/ports and used the following command as root:

pax -rwvpe -s':/usr/ports/.*::gp' -X / /mnt/newdisk/

The -X prevents pax from traversing into mount points that have a different device ID than the one on which it was started. This prevents an infinitely recursive loop from happening when the new disk's mount point would have been hit. It also prevents data on the non-failing disks from being copied as well.
the -s option allows for sed search and replace scripts to be run. In this example, the : is used as the delimiter and any path matching /usr/ports/* is replaced by a null string. With this replacement all directories under /usr/ports are excluded from the copy.

[/unix] [permanent link]

It's not stupid, it's advanced
I opened the Windows 10 settings app, not to be confused with the control panel, and I selected "Windows Update." Next, I chose the "Advanced Options" and was greeted with this mess. I hope the next build fixes this problem, as well as the myriad of other issues plaguing the current Windows 10 preview release.

[/musings] [permanent link]

Happy Birthday

Friday night was the Birthday Massacre/Mindless Self Indulgence show. Due to various circumstances and events, my friends and I made it to the venue just in time to see the last 3 minutes of TBM's set.

I made an attempt to see The Birthday Massacre last August in new York but that attempt failed due to prior commitments. So for two years in a row I tried to see them, and for two years in a row I failed. Sorta.

After seeing the last 3 minutes of the set and being very disappointed, I went over to the merchandise booth to buy a souvenir T-shirt. My friend James joined me and we, mostly James because of his gregarious nature, started a conversation with the guy at the counter, whose name was Zimmy. We told him what had happened and asked if there was any chance of catching the band as their equipment was being packed up.

He told us their gear had already be packed, but if we hung out after the show they'd be coming out to meet the fans. So we hung out after the show.

After the crowd dissipated, we went back into the venue's main room. Sure enough, several members of The Birthday Massacre were standing around, signing autographs, and talking to the fans. James and I went up to O-En first. He was very friendly and talked with us for ten or fifteen minutes. I told him about missing the show two years running and he gave me his sympathies and thanked me for trying to get to the shows. I asked him if he had any idea when they'd be in the area again and he gave me a general idea of when to expect them to be back. He was nice enough to sign my copy of Violet and let us take a photograph.

Next we went over and talked with Chibi. She was also very friendly although we didn't speak to her for quite as long as we did O-En. She signed Violet and took a photo with me and thanked us for coming to see them, even though we missed the set.

The last member of the band I got to see was Rainbow. Like O-En and Chibi, he too was very friendly. We talked to him for several minutes and I collected another autograph and photo.

All three of them were very friendly with every one and they all seemed to genuinely care about their fans. I had heard from some one who had met them before that they were some of the nicest people you could ever meet. O-En, Chibi, and Rainbow confirmed that on Friday night. Now that I've met them, I can't wait for the next opportunity to finally catch their set.

Not that anyone really cares, but these are the photos James took. If you view the full version, be warned that I'm in the photos too.

O-En	Chibi	Rainbow

[/musings] [permanent link]

Happy Birthday

Friday night was the Birthday Massacre/Mindless Self Indulgence show. Due to various circumstances and events, my friends and I made it to the venue just in time to see the last 3 minutes of TBM's set.

I made an attempt to see The Birthday Massacre last August in new York but that attempt failed due to prior commitments. So for two years in a row I tried to see them, and for two years in a row I failed. Sorta.

After seeing the last 3 minutes of the set and being very disappointed, I went over to the merchandise booth to buy a souvenir T-shirt. My friend James joined me and we, mostly James because of his gregarious nature, started a conversation with the guy at the counter, whose name was Zimmy. We told him what had happened and asked if there was any chance of catching the band as their equipment was being packed up.

He told us their gear had already be packed, but if we hung out after the show they'd be coming out to meet the fans. So we hung out after the show.

After the crowd dissipated, we went back into the venue's main room. Sure enough, several members of The Birthday Massacre were standing around, signing autographs, and talking to the fans. James and I went up to O-En first. He was very friendly and talked with us for ten or fifteen minutes. I told him about missing the show two years running and he gave me his sympathies and thanked me for trying to get to the shows. I asked him if he had any idea when they'd be in the area again and he gave me a general idea of when to expect them to be back. He was nice enough to sign my copy of Violet and let us take a photograph.

Next we went over and talked with Chibi. She was also very friendly although we didn't speak to her for quite as long as we did O-En. She signed Violet and took a photo with me and thanked us for coming to see them, even though we missed the set.

The last member of the band I got to see was Rainbow. Like O-En and Chibi, he too was very friendly. We talked to him for several minutes and I collected another autograph and photo.

All three of them were very friendly with every one and they all seemed to genuinely care about their fans. I had heard from some one who had met them before that they were some of the nicest people you could ever meet. O-En, Chibi, and Rainbow confirmed that on Friday night. Now that I've met them, I can't wait for the next opportunity to finally catch their set.

Not that anyone really cares, but these are the photos James took. If you view the full version, be warned that I'm in the photos too.

O-En	Chibi	Rainbow

[/tbm] [permanent link]

QOTD:
"I figured I'm getting too old to run, I might as well get married."

--
Acquaintance on missing a race to meet with caterers for his upcoming wedding.

[/running] [permanent link]

TBMChicago
TBMChicago has some live footage of The Birthday Massacre as well as galleries of photographs taken during performances and after shows hanging out with fans.

I'm a little shocked that it's taken me this long to find this site. But then again, I'm usually out of the loop on things so maybe it shouldn't be too surprising.

I'm waiting for the DVD release of Show and Tell. I haven't found a release date yet, but I could just be out of the loop yet again.

[/musings] [permanent link]

Blosxom 2.2.0
Apparently Blosxom development has been picked up again. There was a new release on 2024-02-03. Nice!

[/unix] [permanent link]

Trouble opening aterm in FreeBSD?
Here's a soltuion! https://forums.freebsd.org/threads/44941/

[/unix] [permanent link]

X11 Mouse Cursor Themes
Starting after installimg the binary nvidia drivers on both my laptop (Quadro K1100M) and my workstation (GeForce GT 630) Blackbox was defaulting to a mouse cursor that was suboptimal, a black, notched triangle.

The settings in the Xresources for the mouse cursor theme are honored by XDM at the graphical log in, but when Blackbox or Fluxbox start, the cursor would change to the black notched triangle. TWM honors the settings in Xresources, but TWM is just a little too minimalist, even for me.

But there's a simple fix!

Create a file in your home directory (if it doesn't already exist) .icons/default/index.theme. In this file, add the following lines:

[Icon Theme]
Inherits = polarblue

where polarblue is the name of the X11 mouse cursor theme you wish to use. FreeBSD installs many of the X11 cursor sets into /usr/local/lib/X11/icons/, your Unix flavor may be different. In theory, you can also install new themes of your choosing into ~/.icons/ and use those without the need for any elevated privileges.

Additionally, there's the option of creating a .Xdefaults file in the home directory and adding the line

Xcursor.theme: polarblue

Again, where polarblue is the name of theme you want to use.

[/unix] [permanent link]

FreeBSD Unix on Dell Precision M4800
I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized.

I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro.

There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers.

I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local.

First I found the device I wanted as the default:

mforde@gaz:~> cat /dev/sndstat 
Installed devices:
pcm0:  (play) default
pcm1:  (play)
pcm2:  (play) 
pcm3:  (play)

Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local

sysctl hw.snd.default_unit=2
sysctl hw.snd.default_auto=2

Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default.

I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys.

But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this.

This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly.

The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1).

I've submitted my dmesg output to NYCBUG's dmesgd repository.

I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints.

[/unix] [permanent link]

Remapping Keys in Vim
While I love the keyboard on my relatively new Dell M4800, I'm not particularly fond of the placement of the Page Up and Page Down keys to the left and right of the Up arrow, and above the Left and Right arrow keys. I find myself accidently hitting those keys too frequently while editing code and jumping all over the file.

So I remapped them. It was quite simple, because Vim is awesome. I added the following lines to my .vimrc file:

map <PageUp> <Up>
map <PageDown> <Down>

This turns Page Up into a second Up arrow, and Page Down into a second Down arrow. For now, I'll leave it like that. I may remap them to the Left and Right arrows in the future. Or not.

[/unix] [permanent link]

How to Make VMWare suck less Tip #273
Find the .vmx file for your VM and add a line

bios.bootDelay = "15000"

That gives you 15 seconds before the virtual machine launches the boot loader, giving you plenty of time to do things like change the boot order so you start from a recovery CD.

[/unix] [permanent link]

Things I love about vim

• Tabbed interface in the 7.x line
• Macro recording
• Built-in sed
• :make
• Not needing to remember a thousand key combinations that require seventeen fingers to properly execute

[/unix] [permanent link]

Resetting Vim
On occasion while I'm coding, I'll mistype something and vim's code autoindenting will stop honoring my settings. Likely, I've done something stupid that has disabled or modifying the settings from the defaults I set in my .vimrc file.

If (when) this happens, Vim can be reset without exiting the procces by going into command mode and typing

:source $MYVIMRC

This reloads the settings of the .vimrc file without forcing you to restart the process, thus losing your place in your code.

[/unix] [permanent link]

... On man pages, a mini-rant
I really despise the linux man pages. They're useless at best and wrong at worst.

From the man page for setsockopt: "The include file <sys/socket.h> contains definitions for socket level options, described below."

1) The options are not "described below."
2) No, that file actually doesn't contain those definitions.

On the other hand... The FreeBSD man page for setsockopt does actually describe the options and under FreeBSD the <sys/socket.h> file does indeed contain the definitions.

[/unix] [permanent link]

[mini-rant]
I hate bash. I hate it. I hate how it bastardized bourne by adding half-assed implementations of features from ksh and tcsh.

[/unix] [permanent link]

Problems with loader.conf

First the background. The story of how I got into this mess:

I'm trying to get ACPI working on my laptop under FreeBSD. Specifically, I'm trying to get Resume to work properly. Suspend works, and resume seems to partially work. The fans spin up, the keyboard's backlight comes back on, but no screen. And without video, it's a little hard to figure out what's going on.

ACPI works great on my server. It's running the same FreeBSD 9.1 x86-64 build that the laptop is, but the biggest difference is that it's an intel motherboard. The laptop is an Alienware, for our purposes, I might as well just call it a Dell.

I started comparing the ASL output from both machines and noticed some things. First, the Alienware's ACPI implementation looks for the OS to be various forms of Windows or "Linux." The intel ACPI implementation also looks for these Windows variants and "Linux" but it has an additional OS string. It has an entry for "FreeBSD."

I figured the easiest next step was to use iasl co compile the intel ASL source and load that DSDT onto the laptop.

I calculated the odds it would work vs the odds I was doing something incredibly stupid... and I went ahead and did it anyway...

I compiled the asl and I set /boot/loader.conf to override the DSDT with the intel one I had just compiled and I rebooted. At first everything was good. The machine went down, I got the boot loader, and the FreeBSD kernel started to load. Seconds into the kernel load, it rebooted itself. After the second time, I powered off and tried a cold boot. Same problem just as I had feared.

Now i was in a situation where I couldn't successfully boot because of an error in loader.conf I needed to find a way to edit it.

And here's the solution:

The FreeBSD bootloader, like many others, works in stages. At a certain point, it can be interrupted at which point it provides a set of simple yet powerful commands to control various aspects of the loading process. If you still have that default menu at load, I beleive the option to chose is 6. I disable that menu so during a brief countdown I hit escape before the boot loader turns control over to the kernel.

Once in the boot loader prompt, I entered the following commands:

unload
load kernel
boot

Pretty simple right? The unload command does what it says, it unloads the kernel and any modules loader.conf had pulled into memory. The load kernel command grabs the kernel and loads it into memory... but only the kernel thus ignoring the broken DSDT in loader.conf. And of course boot tells the boot loader to continue booting the system.

Once booted, I removed the bad DSDT from loader.conf.

[/unix] [permanent link]

Excluding directories while using pax(1)
My primary disk is failing. There are large segments that are generating low level IO errors during read or write operations. Most of the files written to the bad area were under /usr/ports/ where the FreeBSD Ports collection is installed. A few files were under the web server's root.

Figuring I'd take care of things prior to the disk actually failing to the point of it being irrecoverable, I purchased a new disk early. I installed it, partitioned it, and formatted it.

To copy the data over, ignoring the areas that were causing the IO errors, I used mv to "move" the files from the web root under /usr/ports and used the following command as root:

pax -rwvpe -s':/usr/ports/.*::gp' -X / /mnt/newdisk/

The -X prevents pax from traversing into mount points that have a different device ID than the one on which it was started. This prevents an infinitely recursive loop from happening when the new disk's mount point would have been hit. It also prevents data on the non-failing disks from being copied as well.
the -s option allows for sed search and replace scripts to be run. In this example, the : is used as the delimiter and any path matching /usr/ports/* is replaced by a null string. With this replacement all directories under /usr/ports are excluded from the copy.

[/unix] [permanent link]

freebsd-update
I'm attempting to update my laptop from FreeBSD 9.1-Beta1 to 9.1-RC1. The freebsd-update(8) utilitly was reporting an error finding the public key. A quick search found this thread. As per tangram's suggestion, I used

env UNAME_r=9.0-RELEASE freebsd-update upgrade -r 9.1-RC1

and then the update began working.

[/unix] [permanent link]

Fun little alias
I use a console based RSS reader written in Ruby. It crashes often and will delete my list of feeds in the process. It also has a tendency to not fully exit, leaving a ruby process sitting in the background soaking up close to 100% CPU time. For such occasions, I've added the following alias to my .cshrc file.

alias killraggle kill -9 '`ps ax|grep raggle|grep -v grep|awk '\''{print $1;}'\''`'

[/unix] [permanent link]

FreeBSD 6.4 EoL
As of yesterday, FreeBSD 6.4, and with it the entire 6.x branch, has reached its End-of-Life. It's time to upgrade (or maybe upgrayedd, for a double dose of something-or-other).

So herein lies the problems. Months (years?) ago, I attempted to upgrade tak to FreeBSD 7.2. I plugged in a SATA disk into my workstation, installed the OS, reconfigured all the daemons, services, and functionalities tak has running, copied over a snapshot of all the data, and then edited the fstab to match the device names as they'd exist on tak.

I removed the IDE root disk and installed the new SATA disk and tak and watched the kernel fail to find the root disk. Or the other SATA disk in tak.

Based on the bug reports in the FreeBSD Gnats system, and various conversations in the mailing list, it seems Asus, who made the motherboard in tak, used a slightly non-standard SATA implementation on this particular board. Between the 6.x and 7.x line, some work had been done on the SATA drivers in FreeBSD and mad them more standards-compliant (a good thing). This, however, broke SATA on this Asus board.

Tak is about 6 years old now, and other than some over heating issues, serves its purpose well. So do upgrade to FreeBSD 8.x on an IDE disk and replace the other SATA disk with another ATA disk, or do I build a new, lower-power, higher-performance system?

If anyone actually reads this, feel free to use the new comments feature to give me feedback. I think it's working.

[/unix] [permanent link]

SATA Weirdness update
A BIOS update from Intel corrected this issue.

[/unix] [permanent link]

Gmail and mutt
I like mutt. Of all the mail clients I've used over the years, it sucks the least. It works well with my mail server.

Despite having my own domain and mail server, I still use gmail for certain things; things I don't mind being retained for 3 years after I delete them, or more specifically, things I want retained for 3 years after I delete them.

I don't like the gmail web interface. I find checking my gmail to be annoying because of this. I remembered gmail offering POP and IMAP. I figured I could use that to get my gmail. Shouldn't be too hard right?

A quick search of Mr. Yahoo and Mr. Google gave me two good starting points: Lifehacker.com and MattCutts.com.

I read the sites and the getmail man page and figured out what I needed to do. First I enabled IMAP for my gmail account. Next, I created the .getmail directory in my home directory then created a getmailrc file there. I want all gmail mail to be delivered to a specific mbox file without going through my normal mail delivery channels. The contents of the getmailrc file are quite simple:

[retriever]
type = SimpleIMAPSSLRetriever
server = imap.gmail.com
username = username@gmail.com
password = usernamespasswordgoeshere
mailboxes = ("inbox",)

[destination]
type = Mboxrd
path = /usr/home/mforde/Mail/GMAIL

The retriever section defines how getmail will retrieve the mail. In this case it uses IMAP over SSL to connect to imap.gmail.com. The mailboxes setting can be used to specify only certain gmail labels to retrieve, but I want anything in the inbox.

The destination section tells getmail what to do with the mail once it has grabbed it from gmail. This configuration dumps it into an mbox file I've named GMAIL.

I chose IMAP over POP because of the slightly-less-than-documented "feature" of gmail only allowing 99 messages at a time over POP.

So to get the initial batch of 7000+ emails, I ran

> getmail -vvv -l 

to get verbose output and to leave messages on the gmail server. When that was done I pointed mutt at the GMAIL mbox and like magic, there was my gmail, organized nicely in my terminal.

Now, I want to check to get the latest mail fairly often, and I don't want to download messages already copied over. To accomplish this, I added a crontab to run every 10 minutes and invoke

getmail -l -n -q

This tells getmail to leave copies on the server, only get new messages it hasn't already retrieved, and be quiet about it.

This has worked out well for me. If you're interested in setting up something like this, I highly recommend reading the article at matcutts.com. That article also links to several sample getmailrc files.

[/unix] [permanent link]

FreeBSD 8 Beta 3 Available
FreeBSD 8.0 Beta 3 is now available for download. The final release is expected in about a month.

[/unix] [permanent link]

BSD v. GPL
Jason Dixon gave a talk at this year's NYCBSDCon entitled "BSD v. GPL (a.k.a. not the sequel to "BSD is Dying")." It's a humorous look at the differences between the licenses and their supporters. Despite the humor, he made some good points.

You can find a copy of the presentation at The Dixon Group website.

[/unix] [permanent link]

Mailman
The other night I installed mailman on my server. I integrated it into the apache configuration and restarted that. The mailman web interface became available as expected.

I used the web interface to subscribe to the one list I had set up and I received an email asking me to confirm my subscription. I went to the included link, and all seemed to be good.

Another person joined the list successfully, then sent an email to the list. This email never arrived in her inbox. She told me about it, and I checked only to find I did not have a copy either. I sent a mail to the list and promptly received a message saying that [listname] was not a valid recipient at the domain.

That's when I realized I had forgotten to tell the mail server (postfix) about mailman. I had told apache about mailman, and mailman about postfix, but not postfix about mailman.

I used mailman to create an alias database for its single list, then updated postfix's configuration to use that as one of its alias maps. All seems to be working now.

In conclusion, I learned two things. One is always test your configuration before telling people it's ready. The other is, "I'm an idiot."

[/unix] [permanent link]

FreeBSD 7 SATA Weirdness
Over the weekend I installed the x86-64 build of FreeBSD 7 on my workstation, dib. I haven't had time yet to configure everything to my liking yet, but almost everything works.

The one really annoying issue centers around a SATA DVD burner. When this device is attached to the primary SATA controller (ICH7), the system refuses to boot from the hard drive. It reports that no system disk has been found. I've tried all of the SATA settings options in the BIOS and none work.

If I connect the SATA burner to the secondary Marvell "RAID" controller the system boots from the hard drive without issue. In Windows, this requires another driver (which for some reason installed a copy of apache along with it). Under FreeBSD 7; however, this second controller seems to be currently unsupported, leaving me with only the IDE burner available.

I may spend the $20 and get another IDE burner and just forget about the SATA issue, but I really would like to know what the problem is. If any one has any idea why the system would fail to boot from a SATA hard drive when a SATA optical drive is attached, please email me and give me some insight into this issue. Maybe the Unix category wasn't the best for this. I spent more time discussing the hardware/BIOS weirdness than the installation or configuration of FreeBSD7. In fact, FreeBSD 7 isn't a very good title for this either. I'm going to change that.

[/unix] [permanent link]

chdir(2)
So today at work another developer many years my senior, with many more years experience than I, came to me with a Unixy problem.
"When I have a program, how can I have it so the current working directory for all processes it starts isn't the one that it started in?"
"chdir."
"No, I want so that if this process starts something like ls, when ls stats 'dot' I want 'dot' to be the directory that process wants it to be, not the directory that process was started from."
After about 15 minutes of me suggesting chdir while he said that's not what he wanted but then describing chdir, I finally wrote something along the lines of the following

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int
main (int argc, char *argv[])
{
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/tmp");
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/etc");
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/");
  system("/bin/pwd");
  system("/bin/ls");
  return 0;
}

I compiled that, ran it, showed him the output. He said, "Yeah, that's what I want to do."
I showed him the code.
"chdir does that?"

[/unix] [permanent link]

Alpha
Due to the power failure, there was the loss of several hours of work. Last night I installed FreeBSD 6.2-RELEASE on an old DEC AlphaStation 200 I have. I had started building a new, smaller kernel for it around 23:30 last night. It had not completed by the time of the power outage. I have restarted that build.
Any one reading this would reasonably ask, "Why are you not as confused/angry/annoyed with a compile that was not finished in 7 hours as you were about one that took 3 hours?"
The answer is simple. This AlphaStation is powered by a 100MHz DEC Alpha EV4 CPU and has 64MB of RAM. To the best of my knowledge, DEC made this machine around 1994 or 1995. I expected the build to take a long time; the machine is around a dozen years old.

[/unix] [permanent link]

How long does it take to build a linux kernel?
It has been a number of years since I built a linux kernel. Slackware 9.1 was the last GNU/Linux distro I used before switching back to BSD. Tonight I put together a machine from some old parts (1.2GHz celeron with 256KB cache, 256MB RAM, 20GB hard drive) and installed Slackware 12. I customized a kernel configuration and attempted to build it. I don't remember the 2.4 kernel taking as long to build as this 2.6 kernel. It took nearly two hours. Granted, this machine is fairly old, but 2 hours? After I complete the tasks for which I needed this setup, I'm going to install an older Slackware with the 2.4 kernel and build that. I may also install FreeBSD and NetBSD and build their kernels. I'd like to get an idea how long it takes to compile other kernels on this rig.

[/unix] [permanent link]

What Year is This?!
So this was my Saturday night....

[/musings] [permanent link]

Initial Thoughts on Windows 10 -- UPDATED!
I'm done with Microsoft for any platform that is not a telephone. Windows 10 attempts to "fix" the abomination that was windows 8 on the desktop, but just makes things worse.

The "search" "app" that replaces the previous existing search feature really only sends a query to bing. I'm looking for a file somewhere in a subdirectory on my hard drive. I didn't want to search the web for 20141020*.txt. The UI looks like crap. Slapping a titlebar on top of the "modern" "apps" does not make them usable on the desktop. The start menu has returned, but it has never been this useless. And the ability to revert to the "classic" start menu, the behavior introduced in windows 95, and refined in win98 and Windows 2000, has been removed. I shouldn't be surprised by that given that Windows 7 also lacked the "classic" start menu. At least Windows 7 allowed a "Windows Classic" theme for the rest of the UI.

Ever since Service Pack 3 for Windows XP, MS has been slowly and surely trying to make things "easier." However, what they deem "easier" often means removing features and behaviors I relied on to get work done. Windows 10 continues this tradition.

I never really had a problem with Microsoft, I never avoided their software for ideological reasons. I believe in using the right tool for the job. Windows 10 is the wrong tool for any job.

UPDATE!!!

Using the Windows Update mechanism, MS pushed out a new build of Windows 10. This upgraded the installation from build 9841 to build 9860. After a lengthy download, installation, and a very long reboot, I was able to log in again, Only to be greeted by this:



And this lovely error when I tried to open the new "Notification Center":



Now isn't that special?

[/musings] [permanent link]

The Truth is Out There
Tonight, I had the great fortune of joining a person who means the world to me at a book signing by Gillian Anderson and her co-author Jeff Rovin. Jeff has ghost-written/co-written several novels for and with Tom Clancy, and Gillian is AGENT DANA SCULLY!!!

Gillian indicated that she modeled the main character as someone she would play in a cinematic version of the story, and Jeff mentions that, while not required reading, the novel is a spiritual sequel to Edgar Allan Poe's only novel, The Narrative of Arthur Gordon Pym of Nantucket.

I'm going to put The Crytptonomicon on the back burner and put Poe's work and this new novel, A Vision of Fire at the front of my priority queue.

[/musings] [permanent link]

1702672835
---boundaryRMS123
Content-ID:<0000>
Content-Type:text/html
Content-Disposition:inline
Content-Transfer-Encoding:base64
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---boundaryRMS123
Content-ID:0
Content-Type:text/plain;Charset="us-ascii"
Content-Disposition:Attachment;Filename="text_0.txt";Charset="us-ascii"
Content-Location:text_0.txt

One last try
---boundaryRMS123
Content-Type: image/gif; name=tmobilespace.gif
Content-ID:
Content-Disposition: inline; filename=tmobilespace.gif
Content-Transfer-Encoding:base64
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---boundaryRMS123
Content-Type: image/gif; name=dottedline600.gif
Content-ID:
Content-Disposition: inline; filename=dottedline600.gif
Content-Transfer-Encoding:base64
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---boundaryRMS123
Content-Type:image/gif;Name="footer.gif"
Content-ID:
Content-Disposition:inline; filename=footer.gif
Content-Transfer-Encoding:base64
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==
---boundaryRMS123--

[/mobile] [permanent link]

Don't they have better things to do?
It has come to my attention that Congress, in their infinite wisdom, has decided to write legislation against television commercial advertisements having a louder perceived volume than the actual programming.

While I do sometimes find this annoying, do we really need an act of congress to outlaw this? Shouldn't our representatives be doing something better with their time, like repealing hundreds of laws that hinder the free market economy and trample the Constitutionally guaranteed rights of the citizens?

Of course not, that would threaten their power.

[/politics] [permanent link]

Gmail and mutt
I like mutt. Of all the mail clients I've used over the years, it sucks the least. It works well with my mail server.

Despite having my own domain and mail server, I still use gmail for certain things; things I don't mind being retained for 3 years after I delete them, or more specifically, things I want retained for 3 years after I delete them.

I don't like the gmail web interface. I find checking my gmail to be annoying because of this. I remembered gmail offering POP and IMAP. I figured I could use that to get my gmail. Shouldn't be too hard right?

A quick search of Mr. Yahoo and Mr. Google gave me two good starting points: Lifehacker.com and MattCutts.com.

I read the sites and the getmail man page and figured out what I needed to do. First I enabled IMAP for my gmail account. Next, I created the .getmail directory in my home directory then created a getmailrc file there. I want all gmail mail to be delivered to a specific mbox file without going through my normal mail delivery channels. The contents of the getmailrc file are quite simple:

[retriever]
type = SimpleIMAPSSLRetriever
server = imap.gmail.com
username = username@gmail.com
password = usernamespasswordgoeshere
mailboxes = ("inbox",)

[destination]
type = Mboxrd
path = /usr/home/mforde/Mail/GMAIL

The retriever section defines how getmail will retrieve the mail. In this case it uses IMAP over SSL to connect to imap.gmail.com. The mailboxes setting can be used to specify only certain gmail labels to retrieve, but I want anything in the inbox.

The destination section tells getmail what to do with the mail once it has grabbed it from gmail. This configuration dumps it into an mbox file I've named GMAIL.

I chose IMAP over POP because of the slightly-less-than-documented "feature" of gmail only allowing 99 messages at a time over POP.

So to get the initial batch of 7000+ emails, I ran

> getmail -vvv -l 

to get verbose output and to leave messages on the gmail server. When that was done I pointed mutt at the GMAIL mbox and like magic, there was my gmail, organized nicely in my terminal.

Now, I want to check to get the latest mail fairly often, and I don't want to download messages already copied over. To accomplish this, I added a crontab to run every 10 minutes and invoke

getmail -l -n -q

This tells getmail to leave copies on the server, only get new messages it hasn't already retrieved, and be quiet about it.

This has worked out well for me. If you're interested in setting up something like this, I highly recommend reading the article at matcutts.com. That article also links to several sample getmailrc files.

[/unix] [permanent link]

Happy Anniversary
The Twilight Zone premiered 50 years ago tonight. Slashdot has a bit about it.

[/musings] [permanent link]

Writing

"You need strong emotion, whether it's fiery or depressed, an extreme state of mind. I think in any art form it's the case." -- Daniel Ash

Maybe it's my lack of experience. Maybe it's my lack of talent. I tried to sit down and write music for the song known as Ravage in the new naming scheme, but I failed miserably. When I try to force it, like I did tonight, nothing comes out right. I have ideas, I can hear them in my head, but without that inspiration, without that emotion, nothing I produce sounds right.

I've been too happy recently and it's destroyed my creativity. I get the urge, I have the inspiration, to write when I feel negative emotions. I need anger; I need depression. It is in dealing with these emotions that I am able to write.

I have tried several times to force myself to feel this way. This usually buys me a few minutes in which I can write, but it often fails. Because the emotions are artificial, the results are mediocre at best.

I find this situation to be quite frustrating. I want to move forward with this album, but without that inspiration I am unable to do anything.

In the meantime, I'm slowly teaching myself to play guitar and, to a much lesser extent, a keyboard-style synthesizer. I've also been going through materials my music teacher friend gave me to learn some basic music theory. Hopefully once I find that needed inspiration, or find a way to work without being angry or depressed, this new knowledge will make things easier.

[/album] [permanent link]

Revision Control
One could argue that this should be filed under the Unix category, but this post is more about the album than it is about the Concurrent Versions System.

Friday night I created a CVS repository on this server to manage album related files. After discussing it with rskutins, we agreed on several key points.

First, with changes being made a little more frequently than before, it would be best to have some way to track what was going on, and to be able to roll back to a previous version if the changes don't quite work out. Second, we wanted to have a way to organize several files for each song, for instance, lyrics, notes, bass tabs, drum tabs, etc. Last, and maybe the most important reason for the reorganization, we wanted to move away from the numbering scheme that was in place. Each song was numbered from 0 to 17. This was fine until we realized 11 was likely to be the first track on the album.

Now the album is stored in a CVS repository. This will keep a version history of each file, allow us to simultaneously work on parts of the album, and merge our changes.

Within this repository we now have a tree structure where each song has its own directory. The directory will hold any and all files related to that song. In an effort to move away from the numbering scheme, an arbitrary naming convention was mutually agreed upon. The songs are now known by names such as Soundwave, Ravage, Frenzy, and Rumble.

The album is starting to come together. I feel motivated to work on it and recently I've found myself inspired to write. Now if only I had time.

Omlette listened to the Accidental Mix I posted (of the song now known as Soundwave) and gave me some feedback.

It sounded ominous. I don't know how else to describe it since I'm not familiar w/ either artist. Oh wait. Were you mixing your own stuff?

Ominous seems like it could be a good thing given the current direction of the album.

If anyone else takes the time to listen to it, I'd appreciate any comments or suggestions. If you don't have it, my contact information is on this page.

[/album] [permanent link]

Another Demo Update
Two weeks! Ha! It's been closer to two months.

A few days ago I had some time so I sat down with the ProTools set up again. After considering some advice from jlight, I decided to record a second track of the bass line. I decided to use my Yamaha for the second track, as I had used my Fender for the original recording back in June. The two instruments have different characteristics in their sounds and the two playing together seems to add a "fullness" to the sound.

So all I had to do was record 24 seconds of bass and put together a mix. This should take, what, 15 minutes? It took 45 just to record. Once again ProTools repeatedly crashed. When it wasn't crashing, it would report an error and stop recording. Does anyone know if there are updates for ProTools LE 7.1 that will fix this issue? As it stands now, I can't run ProTools for more than a few seconds without disabling multi-core support on my CPU. I have multiple processors. It is a multi-threaded application. It should run better... But I'll save this for that upcoming ProTools rant I keep promising.

Anyway, after about an hour and fifteen minutes, I got two mixes complete. One of them was accidental and sounds, "interesting." The other is closer to what I had in mind. While I wait for feedback on the actual mix from certain people, everyone is free to enjoy the accidental mix found here.

If anyone actually listens to it, I'd be happy to accept any comments and criticism.

[/album] [permanent link]

Demo -- Update
Rskutins recorded his drum part and sent it to me via the wonders of TCP/IP netowrking. On Friday night I finally had enough time (and motivation) to start recording.

I spent a lot of time fighting with ProTools. It repeatedly crashed. Often, when it didn't crash, it simply stopped recording and reported that an error had occurred. I'm remembering this for the ProTools rant that will be coming in the future.

After 45 minutes I had recorded about 6 seconds of vocals and the 24 second bass line. The next block of Copious Free Time(TM) I have, I'll begin the rough mix of the three parts. Hopefully ProTools won't crash as often during that phase.

With any luck, it'll be mixed in the next week or two.

[/album] [permanent link]

Demo
In the next few weeks we are going to attempt to record and roughly mix a demo of a short track which will serve as an introduction to the album.

Currently known as 11, it is a very short piece in 4/4 time at 80bpm. It is in the key of B minor and the spoken words are taken from a quote attributed to Nietzsche.

What upsets me is not that you lied to me, but that from now on I can no longer believe you.

This short demo will hopefully get me motivated enough to put more time into the album.

More information will be posted when it becomes available.

[/album] [permanent link]

A Brief History
Last Summer, my friend, rskutins, and I decided we were going to write an album. He got out his drum machine, being smaller and easier to store and carry than a full kit, and I got out my bass and we started putting together some pieces that were... not good.

We had little direction, I was afraid to play things outside of my comfort zone, and we had some problems communicating. This project quickly fell apart, but we never completely gave up the idea.

In March I found the inspiration I needed. I talked to rskutins and we started working on an album again. This time, fueled by strong emotion, both fiery and depressed, I started by writing lyrics.

Not all are complete, but there are about 15 sets of lyrics for us to use as a starting point. Rskutins has tweaked the lyrics in some places to make them fit a better rhythm while still maintaining the intent of the words. I am quite pleased by what he has done.

Based on these lyrics we have begun writing short pieces here and there when we feel inspired. Rskutins has laid down some pretty good beats to start with. I've been attempting to learn some basic music theory and trying to apply those ideas to the layers on top of what rskutins has written already.

And that's where we are now. Still learning, still writing. Our day jobs have slowed down our progress considerably so it could very well take until the Autumn before we're ready to record and mix the album.

[/album] [permanent link]

Fun little alias
I use a console based RSS reader written in Ruby. It crashes often and will delete my list of feeds in the process. It also has a tendency to not fully exit, leaving a ruby process sitting in the background soaking up close to 100% CPU time. For such occasions, I've added the following alias to my .cshrc file.

alias killraggle kill -9 '`ps ax|grep raggle|grep -v grep|awk '\''{print $1;}'\''`'

[/unix] [permanent link]

1443142404
This is only a test. Had this been an actual post, there would be actual content. Or not.

==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

Resetting Vim
On occasion while I'm coding, I'll mistype something and vim's code autoindenting will stop honoring my settings. Likely, I've done something stupid that has disabled or modifying the settings from the defaults I set in my .vimrc file.

If (when) this happens, Vim can be reset without exiting the procces by going into command mode and typing

:source $MYVIMRC

This reloads the settings of the .vimrc file without forcing you to restart the process, thus losing your place in your code.

[/unix] [permanent link]

Time Travel?
A few months ago I happened to snap a photo of the DeLorean on Main Street in Boonton near the Darress Theatre. It's probably one of my favorite photographs of the car and certainly one of the best I've ever taken.
The theatre was built in 1919 and has remained largely unchanged since then. A lot of Boonton still has a very old "look and feel" to it, and this section of Main Street served as a perfect backdrop for the DeLorean.

[/dmc] [permanent link]

How to Drive a Classic Rolls-Royce, or a DeLorean, Any Time You Want
Bloomberg has posted an article entitled How to Drive a Classic Rolls-Royce, or a DeLorean, Any Time You Want. It's really quite simple, actually. You take your keys, go out the the garage, and you drive the DeLorean any time you want.

[/dmc] [permanent link]

Aisling at 35
She's still looking good at 35....

[/dmc] [permanent link]

Happy Birthday Aisling!!!!
My DeLorean, #5333, was built in October of 1981. This month, the car will be 35 years old and she looks and handles like the day she came off the assembly line.

[/dmc] [permanent link]

Fun Conversations
The DeLorean often leads to conversations one wouldn't normally expect. Case in point: today I had to call my auto insurance provider for an issue with my daily driver. After taking some info to pull up my account the conversation went something like this:

Agent: Which car is this?
Me: The Pontiac.
Agent: Am I reading this right?
Me: Reading what?
Agent: I'm sorry, do you have a DeLorean?
Me: Yes.
Agent: I never thought I'd see someone with a policy on a DeLorean.
Me: Well, you've insured both of mine...
Agent: You've had two DeLoreans?
Me: Yes.

At that point there were a few more questions and then we got back to the issue which my phone call had been about originally.

[/dmc] [permanent link]

An Observation
There is something satisfying about driving in a DeLorean while listening to The Clash's Live: From Here to Eternity.

[/dmc] [permanent link]

New Vernon Coach and Motor Works is Awesome
For as long as I've been a DeLorean owner, I've been taking the car to New Vernon Coach and Motor Works. They have always been professional and courteous, and they have always done top-notch work. I highly recommend them.

[/dmc] [permanent link]

Give My Love to the Princesses
I was out and about and happened to run into these two lovely ladies who seemed to like the car.

[/dmc] [permanent link]

Normalcy
I realized that if and when I have children, they will grow up thinking it's normal to have a DeLorean.

[/dmc] [permanent link]

Christmas Eve
On Christmas Eve, I headed out around 7:00PM to take a look at the Christmas lights and decorations around town. There was a snow storm predicted for around 9:00PM, so I decided to take the DeLorean out for one last drive before the Wonderful Winter Weather(TM).

The snow started much earlier than expected. The snow was light and slow, and despite the car not handling well in slick conditions, I kept going for a while.

As I was driving I had the realization that I was having an experience no one else in the world has ever had. I was driving a DeLorean through my town on Christmas Eve, admiring Christmas lights and listening to Christmas music as snow fell.

I looked over at the empty passenger seat and wished there had been someone, anyone there to share this with. So for now, until circumstances like this arise again, I will continue to be the only person to have experienced this.

When I got home, I took this photograph.

[/dmc] [permanent link]

Updates!
I realized I haven't updated this section of my blog (that no one reads anyway) in over a year. A lot has happened since then.

I sent my DeLorean (#6291) to DMC Houston to have the frame replaced. (A quick note to anyone buying a DeLorean from a private owner: Have a mechanic you trust get the car on a lift before you buy it). The guys at DMC found a lot more wrong with the car that had been covered up. After many conversations with Steve Wynne about the car, I decided to cut my losses and sell it for parts. I tried to live the dream, and it turned into a small nightmare.

It was then that Steve told me about a DeLorean they had just taken in from an owner in Indiana. This DeLorean was a month older than mine (built in October of 81) and had the grey interior and 5-speed manual transmission just like mine. Everything was in great condition and it only had about 9,900 miles on it. He offered me a trade-in value for my car, far more than I thought it would be given its condition.

After some deliberation I decided if I didn't take it, I'd never have the car and my childhood dream would be dead. I agreed to the trade-in and then I began working with James Espy about all of the details of the purchase. I continued working with Steve in regard to the work being done on the car.

They replaced the leather on the seats. While the original leather was not cracked, it was almost 30 years old and a bit dry. They replaced the headliners and the radio, and performed a full maintenance on it. They even took it to some local car shows.

When I took delivery of the car in early September, it had just over 10,000 miles on it.

After a year of owning the vehicle, I've put about 1000 miles on it. And I've enjoyed every one of them.

[/dmc] [permanent link]

If all goes according to plan...
This time tomorrow, my car should be on its way to Texas.

[/dmc] [permanent link]

Bing!
It has come to my attention that searching bing for pictures of closed doors yields pictures of my DeLorean.

[/dmc] [permanent link]

It exists
As part of the DeLorean's restoration, I've been considering a backlit dash. I had considered sticking with the stock dash with the white light bulb in front of the gauges, but I thought a red backlit display would be better for night vision.

Then came the issue of whether or not something like that exists. Turns out it does. Speed Hut carries a line of customizable gauges for the DMC-12 as part of the EL-Glo line.

[/dmc] [permanent link]

DMC Houston
It looks like the DeLorean needs some non-trivial work done on it. The mechanic I had taken it to found an issue he's not equipped to deal with. My first call was to DMC Houston where I talked to Stephen.

He was friendly and incredibly knowledgeable. He said he'd work with me and Dave at their facility in Chicago to figure out what the extent of the work would be and the best way to approach it. Odds are the car is going to have to be shipped to Chicago for a few weeks.

[/dmc] [permanent link]

Highway driving
On the way to the mechanic yesterday, I had the DeLorean out on 287 South. Near one of the Boonton exits, a guy in old Stingray pulled up next to me on my right. I looked over, he looked at me, and we gave each other a nod. I sped up a bit to keep with the flow of traffic and he moved as if exiting soon thereafter.

This was my longest trip with the DeLorean thus far, and also the fastest I've ever driven it. And no, I still haven't gotten it to 88mph.

[/dmc] [permanent link]

It's like I'm 16 again
You'd think I would have learned to drive by now. I've had the DeLorean for a month now and I'm still a little shaky coming off stop lights and signs but over all I'm better. I've only driven it a handful of times and I should really be driving it more often if I want to get better.

I'm thinking of adding a separate section to the site dedicated to the DeLorean and every step in the process of acquiring it. I found a lot of useful information on the websites of other owners that helped a lot.

[/dmc] [permanent link]

I think I'll take the DeLorean today...
After taking the Pontiac to inspection this morning, I got the urge to drive the DeLorean. I need to drive it more anyway so I think it may be joining me on some errands this morning.

[/dmc] [permanent link]

"Why the hell don't the plugins have proper documentation"
I had to pick up something in Fair Lawn for a friend this evening. It was later in the evening, well after rush hour but there was still a good amount of time before the sun went down so I decided to take the DeLorean out.

I got her out on Rt 80 and she handled beautifully. The turns on the entrance and exit ramps felt better than in my Pontiac. I was a little nervous about over-steering because of the rear mounted engine, but it wasn't an issue.

When I arrived at my destination, I got some looks from a woman walking her dog and some guys across the street working on something in their garage/driveway. I had a bit of an issue getting back on to 80 due to a construction vehicle and an a-hole in a BMW, but everything else was fine. I'm getting much better at driving it.

On the way home at the 80/23/46 interchange a minivan pulled up beside me and beeped their horn. I looked over and they gave me a thumbs up.

It was most triumphant.

[/dmc] [permanent link]

"Because you will be approached by people with questions and stupid jokes."
I took the DeLorean when I went to the bank this morning. I pulled into the parking lot and found a space. As I got out of the car a guy around my age came running over before I could shut the door.

He said, "I can't believe it, this amazing. I've always wanted to see one of these. Man, I was just watching the movie last night. Can I take a picture?"

I said, "sure" and let him know that it still needed some work so it doesn't look as good as it could. He said, "It doesn't matter; it's a DeLorean."

Later in the afternoon I went to get some more gas. I pulled into the station, shut off the car, got out and opened the hood to get to the gas cap. Neither of the attendants on duty had seen one before and both came over to see the car. They had some questions about the body construction and the engine.

[/dmc] [permanent link]

The new phone book is here!
I am now officially 5% rockstar. At least I am according to the New York Times. I am now the proud owner of DeLorean #6291 manufactured in November of 1981.

[/dmc] [permanent link]

Running...
On Saturday I ran in the Beavertown 5K Fall Classic. The run took place in near my home, so I ran the two miles to the registration location. About a half hour after I signed in, the 5K started. Once I finished, I ran the I ran the (roughly) two and a half miles back home.

I did much better than in my previous 5K runs this year. I took almost 12 and half minutes off my time from the Lincoln Tunnel 5K, and over 4 minutes from my previous best.

I think a lot of the improvement in the shorter distances can be attributed to the fact that I've been training on longer distances lately. In the past two months I've been running about eight to ten miles each day.

A few weeks ago I ran my first half marathon distance. About 10 days ago I ran 20 miles, and took 15 minutes off my time in the half marathon. I promptly fell apart after that and my pace slowed dramatically.

Yesterday I attempted another 20 miles and did not fall apart completely after the first 13. I made it to the 15 mile mark before I had any problems. I managed to finish the run and take a half hour off my previous time.

[/running] [permanent link]

Merry Christmas
While the holidays are supposed to be a joyous time, I know and understand how hard they can be for some people. If you're having a rough time over the next week or so and need someone to talk to, feel free to message me. If you're reading this blog, you likely know my email address or phone number.

[/musings] [permanent link]

Aisling at 35
She's still looking good at 35....

[/dmc] [permanent link]

Happy Birthday Aisling!!!!
My DeLorean, #5333, was built in October of 1981. This month, the car will be 35 years old and she looks and handles like the day she came off the assembly line.

[/dmc] [permanent link]

Don't Call it a Comeback
On June fourth, I was running in the Tourne on a trail I first ran twenty years ago, a trail I've run hundreds if not thousands of times before. On that morning, my foot came down on a wet rock at just the wrong angle, slipped just enough and I rolled my ankle. Not only did I roll the joint, I came down on it with enough force to break it; a fact I would learn when I final saw a doctor about it on June ninth.

No surgery was required, but I was unable to run for three months. I was finally cleared to run. The plan was to start with short distances, about a quarter mile, on a rubberized track then build up from there, moving on to treadmills and eventually roads and trails. I was instructed to spend six months rebuilding my 60 mile per week base.

On the morning of September 11 (a day I will never forget and a morning that will always make me feel a bit uneasy), I took to the track for the first time. I started by walking a mile. As I finished the fourth lap, I said a prayer, asking God to give me the run I needed and the wisdom to know when to stop. I queued up my playlist: AC\DC's "Back in Black" and LL Cool J's "Mama Said Knock You Out." I took my first stride.

I've been progressing well in the last two weeks; pushing it on some days, resting when necessary. Though the short, slow distances have been frustrating, it feel good to be running again. Every stride I take I'm reminded of everything I love about the sport.

It's good to be back.

[/running] [permanent link]

Fun Conversations
The DeLorean often leads to conversations one wouldn't normally expect. Case in point: today I had to call my auto insurance provider for an issue with my daily driver. After taking some info to pull up my account the conversation went something like this:

Agent: Which car is this?
Me: The Pontiac.
Agent: Am I reading this right?
Me: Reading what?
Agent: I'm sorry, do you have a DeLorean?
Me: Yes.
Agent: I never thought I'd see someone with a policy on a DeLorean.
Me: Well, you've insured both of mine...
Agent: You've had two DeLoreans?
Me: Yes.

At that point there were a few more questions and then we got back to the issue which my phone call had been about originally.

[/dmc] [permanent link]

An Observation
There is something satisfying about driving in a DeLorean while listening to The Clash's Live: From Here to Eternity.

[/dmc] [permanent link]

What Year is This?!
So this was my Saturday night....

[/musings] [permanent link]

He's Not Wrong...
Over at Net Meister there's a nice peice entitled Things They Don't Teach You in School". A lot of what Jan has to say is spot-on observation and good advice.

It's definitely worth a read.

[/code] [permanent link]

Trouble opening aterm in FreeBSD?
Here's a soltuion! https://forums.freebsd.org/threads/44941/

[/unix] [permanent link]

X11 Mouse Cursor Themes
Starting after installimg the binary nvidia drivers on both my laptop (Quadro K1100M) and my workstation (GeForce GT 630) Blackbox was defaulting to a mouse cursor that was suboptimal, a black, notched triangle.

The settings in the Xresources for the mouse cursor theme are honored by XDM at the graphical log in, but when Blackbox or Fluxbox start, the cursor would change to the black notched triangle. TWM honors the settings in Xresources, but TWM is just a little too minimalist, even for me.

But there's a simple fix!

Create a file in your home directory (if it doesn't already exist) .icons/default/index.theme. In this file, add the following lines:

[Icon Theme]
Inherits = polarblue

where polarblue is the name of the X11 mouse cursor theme you wish to use. FreeBSD installs many of the X11 cursor sets into /usr/local/lib/X11/icons/, your Unix flavor may be different. In theory, you can also install new themes of your choosing into ~/.icons/ and use those without the need for any elevated privileges.

Additionally, there's the option of creating a .Xdefaults file in the home directory and adding the line

Xcursor.theme: polarblue

Again, where polarblue is the name of theme you want to use.

[/unix] [permanent link]

FreeBSD Unix on Dell Precision M4800
I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized.

I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro.

There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers.

I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local.

First I found the device I wanted as the default:

mforde@gaz:~> cat /dev/sndstat 
Installed devices:
pcm0:  (play) default
pcm1:  (play)
pcm2:  (play) 
pcm3:  (play)

Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local

sysctl hw.snd.default_unit=2
sysctl hw.snd.default_auto=2

Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default.

I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys.

But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this.

This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly.

The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1).

I've submitted my dmesg output to NYCBUG's dmesgd repository.

I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints.

[/unix] [permanent link]

Megapath sucks
Speakeasy was by far the best ISP I ever dealt with. Freindly, and above all, knowledgeable. Since they have been purchased by Megapath then merged into Global Capacity, their tech support has been, frankly a bunch of idiots. Furthermore, their website routinely has "Service failed" errors that prevent you from logging in, changing passwords, and viewing account information.

Today, after being unable to log in to the website due to "service failed" the tech support rep on the phoned didn't understand what a subnet mask or gateway address were. Eventually I just got her to read me "all three IP addresses" on the screen in front of her.

But at this point my only other option is Verizon. So I'm sticking with Megapath.

[/musings] [permanent link]

Found this sitting in a tarball of my old home directory...

                                                                                                                              
                                                                                                                              
              ..,,..  ..ttLLLLtt..  ..;;ii;;,,..;;ttGGLL;;....iiiiiiiiiiii..    ..iijjttttii..                                
      iiLLLLGGKKKKDDLLGG########GGLLDDWWWWWWKKKKKK######WWDDEEWW##WWWW##WWDDjjffDD##########LL..          ..;;..              
  ..ffWW########WWKK####KKjjttEE####WWGGGGEEGGDDDDGGjjttGGKKWWWWLLGGLLGG##########DDjjttttGG##GGffttiiiiffDDKKDDGGGGGGii      
  ff####GGffffttii;;ttLLiijjtt;;LLtt;;,,,,;;;;;;iittLLtt;;,,iiiiiitt;;;;ffGGGGLLtt;;iiii;;;;DDWW####WWWW####KKDDKKKKWWWWtt    
..EE##LL;;ttttLLttLLLLttff##WWGGjjffGGDDGGKKKKKKWW####WWDDGGDDDDWW##EEEEffttffLLffGGWWWWGG;;;;ttffjjffDDDDff;;;;;;iittKKWWii  
;;KKKKiittKK######WWWW######################################KKKKWW##WW##################WWKKDDffttjjjjiiiiiiLLEEGGDDiittWWLL  
..KK##ttGG######WWDDDDEEKKDDKKWWDDKKEEKKWWEEKKEEWW##WWKKWWEELLLLDDDDDDEEEEEEEEEEEEEEKK##########WW####KKWWKK########KKiiDDEEii
  DD##ffGG######EELLLLLLLLLLGGDDLLDDGGDDDDLLLLEE####WWGGGGLLLLLLLLLLLLLLLLLLLLLLLLDDKK######WW####KKKKKKWWWWKKKKWW####ttLLWWLL
  GG##LLLL##KKKKDDLLLLLLLLLLLLLLLLLLLLLLLLLLGGWW####WWLLDDLLLLLLLLLLLLLLLLLLLLLLGGKKWW######EEEEDDLLLLLLDDEEEELLEE####ffLLWWGG
  LL##GGjj##KKLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLDDKK####WWLLEEDDLLLLLLLLLLLLLLLLLLLLGGEEKK##WW##EELLLLLLLLLLLLDDDDLLKK##WWiiGGKKjj
  jj##GGiiWWWWGGLLLLLLLLLLLLLLLLLLLLLLLLLLLLDDKK####KKLLKKEELLLLLLLLLLLLLLLLLLLLLLLLKK##GG##EEDDDDLLLLLLLLLLLLLLKK##GG;;KKDD;;
  ii##EE;;DDWWGGLLLLLLLLLLLLGGLLLLLLLLLLLLLLLLKK####KKLLDDDDLLLLLLLLLLLLLLLLLLLLLLLLEE##ffWWKKEEEELLLLLLLLLLLLLLKKWWiijj##ff  
  ;;WWWWiiGGKKLLLLLLLLGGLLDDEEDDLLLLLLLLLLLLLLKK####KKDDGGLLLLLLLLLLLLLLLLLLLLLLLLLLDDWWttEEWWDDDDLLLLLLLLLLLLLLEEKKiiKKWW;;  
  ;;WW##ttGGWWGGLLLLLLEEDDEE##KKLLLLLLLLLLLLLLKK######WWEELLLLLLLLLLLLLLLLDDDDGGGGDDKKWWiiLLWWGGLLLLLLLLLLLLLLLLKKKKttWWLL    
  iiWWKKiiKK##DDLLLLLLEEEEWW##WWDDLLLLLLLLLLLLKKWW######EELLLLLLLLLLDDEEEEWWWWKKKKWW####ii;;KKDDLLLLLLLLLLLLLLDDWWKKffWWtt    
  ii##WWttWW##EELLLLLLDDEE######EELLLLLLLLLLLLKKDDEE####KKLLLLLLLLLLEE##################ii..KKEELLLLLLLLLLLLGGDD##DDffWWii    
  ;;WW##ttLL##KKLLLLLLLLEE##KK##KKLLLLLLLLLLDD##LLLLEEWWKKLLLLLLLLLLKK####WWKKffLLKKWWGG;;..EEKKLLLLLLLLLLLLDDEE##LLLLWWii    
  ..EE##LLiiWWKKLLLLLLGGKK##LLKKKKGGLLLLLLDDWW##ff;;iiKKKKLLLLLLLLLLKK##WWLLffttiijjLLiiffttGG##DDLLLLLLLLDDEEKK##ffLLKKii    
    LL##KKiiKKWWGGLLLLLLKK##ttGGWWDDLLLLLLEE####tt;;,,EEKKDDLLLLLLLLEE##########WWWWWWttGGGGttWWWWDDLLLLLLGGGGKK##ffGGKK;;    
    iiWW##ttGGWWDDLLLLGGWWKK;;GGWWDDLLLLLLEE##KKiiGG;;KKKKDDLLLLLLLLGGEEWW##KKEEDDDDKKttKK##ttGG##DDLLLLLLLLGGWW##jjEEEE..    
      GG##GGttWWDDLLLLGGWWKKiiWWWWDDLLLLLLEE##GGttKKiiGG##EELLLLLLLLLLLLGGDDGGLLLLEEKKjjWW##ffLLWWGGLLLLLLLLGGWWWWjjKKGG      
      tt##EEttWWDDLLLLDDWW##WW####DDLLLLLLKK##ffLL##DDttWWWWDDLLLLLLLLLLLLLLLLLLLLKKKKjj####jjGGKKLLGGLLLLLLDD##KKttWWLL      
      ii##KKttKKDDLLLLGGWW####WW##EELLLLLLEE##jjGG####ttDDWWGGLLLLLLLLLLLLLLDDDDGGWWEEtt####ttKKWWLLLLLLLLLLDD##GGffWWtt      
      iiWWKKttWWEELLLLLLEEKKKKEEEEDDLLLLLLEE##ttEE####jjKKWWDDLLLLLLLLLLLLLLDDDDDDWWDDtt##WWttWW##DDLLLLLLLLEE##LLLLWWii      
      iiWWKKff##EELLLLLLLLLLLLLLLLLLLLLLLLEEWWttKK##KKttWW##EELLLLLLLLLLLLLLLLLLDD##GGtt##WWttWW##EELLLLLLLLEE##ttGGEE..      
      iiWWWWff##KKLLLLLLLLLLLLLLLLLLLLLLGGKKWWttWW##KK;;EE##EELLLLLLLLLLGGGGGGGGEE##GGtt##WWttKK##EELLLLLLLLEEWWttEELL        
      ;;WWKKff##KKGGGGLLDDLLLLLLGGLLLLLLDDWWKKtt####WWiiLL##EELLLLLLDDKKWWWWKKWW####ffff##WWttEEWWDDLLLLLLLLEEKKiiEELL        
      ;;WWKKjjWWKKLLLLDDWWEEDDEEKKDDLLLLDDWWKKjj######jjLL##EELLLLLLEE##############jjLL####ttGG##DDLLLLLLLLKKKKiiKKff        
      ;;WWWWttKKEELLLLEE####WW####KKGGLLDDWWDDjj######ffGG##EELLLLLLEE##LLLLLLWWWWKKiiGG####LLjj##DDLLLLLLLLKKEEttWWff        
      ;;KKWWiiEEDDLLLLWW############DDLLGGWWDDjj######GGff##KKLLLLLLEE##ttiiiitttt,,;;KK####DDtt##EELLLLLLLLKKDDttWWtt        
      ;;KKWWiiDDDDLLLLWWWWffff######EELLDD##GGff######KKttWW##DDLLLLEE##ffGGKKjj;;iiDD######KKjj##KKLLLLLLLLKKGGffWWii        
      ,,KK##iiDDEELLLLWWGG  iiffffWWDDLLEE##GGff########ttGG##EELLLLEE##ttLL####WWWW########KKtt##KKLLLLLLGGWWLLLLKK;;        
      ..KK##ttLLKKLLLLKKGG......ttKKGGLLEE##LLLL########GGtt##KKLLLLEEKK;;LL########WWKKWW##KKttWWWWDDLLLLDD##ffLLGG..        
      ..KK##jjLLWWGGLLKKKK;;ttttff##DDLLDDWWttGG########KKttWWKKGGLLDDKKiiEE##ffttttii..ttWWWWttKK##EELLDDKK##ttGGGG          
      ;;KK##ffLLWWGGLLKKEE;;LLGGtt##KKLLGGKKjjKK########WWttKKWWDDLLDDKKttKKEE..          GG##ffff##WWDDWW##EEiiEELL          
      ..DD##GGttWWDDLLEEGG..LLWWttKKKKGGEEKKjjWW##########ttGG##KKDDDDWWttEEDD..          tt##KKiiWW##WW####GGtt##ff          
        ff##KKiiWWDDGGEEGGiiWW##ttDDKKDDWWKKjj############ffLL####WWKK##ttDDEE..          ;;KK##ttLL######WWttLL##ii          
        ;;WWWWttKKWWKKKKGGjj####ttGGWWEEWWGGtt############LLLL##########ttKKDD              GG##EEiiDD####LL;;KKEE..          
        ..EE##ffLL##WW##GGtt####jjLL######LLtt############LLttWWGGKK##LLttWWLL              iiWW##ffff####ttGG##ff            
          LL##EEttGGLL##GGtt####LLttWWKK##ffLL##EEttttKK##DD;;ff;;ttEE;;GG##tt                ff##DDiiKKLLiiWWKK;;            
          tt####ttii;;KKffff####KKiiii;;GG;;LL##ii    iiWW##LL::  ;;tttt##DD..                ;;KKWWiiffiiGG##ff              
          ..KK##GGttiiii;;GG######DDLLii;;;;KKEE..      ff####DDLLii;;GGWW;;                  ..DD##LL..tt##KK;;              
            jj######GG..jj############GGiiDD##ff        ..LL######WWKK##GG                      ff##WWDDWW##tt                
            ..LL####WWGGWWWWffiittGGWW##WW##DD::          ..ffKKWWWWWWKKtt                      ,,DD######ff..                
              ..ttEEWWWWDDii        ttEEKKGG;;                ..;;;;ii;;                          ;;ttffii..                  
                  ..ii;;..            ..;;..                                                                                  
                                                                                                                              

[/musings] [permanent link]

Remapping Keys in Vim
While I love the keyboard on my relatively new Dell M4800, I'm not particularly fond of the placement of the Page Up and Page Down keys to the left and right of the Up arrow, and above the Left and Right arrow keys. I find myself accidently hitting those keys too frequently while editing code and jumping all over the file.

So I remapped them. It was quite simple, because Vim is awesome. I added the following lines to my .vimrc file:

map <PageUp> <Up>
map <PageDown> <Down>

This turns Page Up into a second Up arrow, and Page Down into a second Down arrow. For now, I'll leave it like that. I may remap them to the Left and Right arrows in the future. Or not.

[/unix] [permanent link]

New Vernon Coach and Motor Works is Awesome
For as long as I've been a DeLorean owner, I've been taking the car to New Vernon Coach and Motor Works. They have always been professional and courteous, and they have always done top-notch work. I highly recommend them.

[/dmc] [permanent link]

How to Make VMWare suck less Tip #273
Find the .vmx file for your VM and add a line

bios.bootDelay = "15000"

That gives you 15 seconds before the virtual machine launches the boot loader, giving you plenty of time to do things like change the boot order so you start from a recovery CD.

[/unix] [permanent link]

Prince
I'll never forget the day I started liking Prince's music. I was with my friend in his car headed somewhere. We were listening to K-Rock and they had a "listener playlist" where for about an hour, all the music had been selected by a listener and this listener was on the phone, talking with the DJ about his selections and introducing songs.

The guy announced that the next song was from Prince. The DJ questioned this selection and he said, "No, this dude can shred. Just listen."

And we laughed.

And we listened.

And Prince shredded.

[/musings] [permanent link]

It's been a while...
It's been a while since I've had a substantial update here. I've been busy living life leaving little time to be writing about it; at least writing about it here.

Work has been quite busy for a while now. Lots of projects, lots of deadlines, lots of extra hours. But there hasn't been any "mandatory seven day work weeks" like I had at that one job, and there isn't that expectation of "you can work from home so you are always expected to be working" I had at the last job. Plus, the work is a lot more interesting than anything I've done in years.

Bernstein was right: money doesn't motivate me, interesting problems and the ability to tinker do.

Yesterday the DeLorean rolled over to 16,000 miles. That's still about 1,000 miles a year I'm putting on it. I'd like to keep the mileage low, but she's just so much fun to drive. I've been asked by people at work to bring Aisling next week for Bring Your Child to Work Day. Apparently a lot of my co-workers have told their kids about the car and they want to see it.

I ran my 29th half-marathon this past weekend. I'd like to get up to 32 this year. I'm also signed up for my 13th marathon this Autumn. I'm considering running number 14 a few weeks later.

In addition to all of that taking up my time, I've also been volunteering with the Youth Ministry at a church in my diocese. That's been quite an amazing adventure. It's had a profound impact on my life and has certainly helped at least a few teens. It's been an honor to do the Lord's work. Maybe someday I'll publish some of the talks I've given. The In His Image talk seems to have resonated with a lot of people, certainly more so than some of the other talks.

I guess that sums things up for now.

[/musings] [permanent link]

1461117251
"Each of us is willed. Each of us is loved. Each of us is necessary." - Pope Benedict XVI

==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

On Content "Management" Systems
Wordpress is the new Typo3.

Discuss amongst yourselves.

[/musings] [permanent link]

1454815466
Beautiful https://www.instagram.com/p/BBeDsOSrXEk/

==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

1453995544
https://m.youtube.com/watch?v=P3hY1eagq88

==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

Tenth Runniversary
Today is my tenth runniversary. It's been a decade since I first stepped on that treadmill. Like my first day running, I ran on the treadmill while listening to br\oken. I've had some set backs in my recovery. Not properly rehabilitating the atrophy in the left leg has caused some problems with the muscles around my hip. Listening to my trainer only made it worse. But now I'm taking care of it properly. Like that first day ten years ago, I have a goal I am working toward. This time it is the Dublin Marathon in October. This will be marathon number 13. I don't expect to PR. I think 10 minute miles are a much more reasonable goal at this point, but frankly I'll be happy just to cross that finish line. It's been a long, hard road out of Hell, but God has been by my side and put some amazing people in my life to help me along the way. I have to thank the Giraffes for today. I have to thank the Giraffes for much of my life this last decade. I was heading for an early grave, and they changed that. Giraffes, I thank you from the bottom of my heart and I look forward to running the LTC and many other races with you in the next decade.

[/running] [permanent link]

Take back your privacy
Recent surveys have found that 76% of [the most visited] websites in the world cotain trackers from google and 24% contain trackers from facebook. This has been reported by CNBC, PC World, The Verge, Fortune, and Breitbart.

Almost anywhere you go on the internet, they are following you, building a profile on you, and selling that information, your information, to the highest bidder. Even if you don't have a user account for google or facebook "services," they've built a profile of you using this surreptitiously collected data.

It turns out there are some steps one can take to prevent these companies from following you wherever you go. It's not perfect, but it helps a lot. First, don't use Chrome. Second, install ad-blocker plugins for your browser. Third, use your firewall.

It turns out Google and Facebook are large enough that they have their own Autonomous Systems (AS) composed of numerous subnets. Google owns AS 15169, while Facebook owns AS 32934. Using a little bit of shell, it's relatively easy to look up all the subnets owned by these companies.

whois -h whois.radb.net -- '-i origin AS32934' | grep "^route:" | awk '{print $2;}'
whois -h whois.radb.net -- '-i origin AS15169' | grep "^route:" | awk '{print $2;}'

That's a lot of subnets. Because I have different operating systems on different computers and still want to block traffic to and from all those IP addresses, I've written some simple scripts to add rules to various firewalls. I have scripts for IPFW on FreeBSD, IPTables on Linux, and the Windows Firewall that should work from XP SP3 through Windows 10. I've only tested it on Windows 7 and Windows 10, and it worked in those.

All of these scripts can be found in this directory. The IPFW and IPTables scripts are self-contained. For the Windows command shell batch files, the *ips.txt files are also needed.

I have to say, the internet looks very different with these firewall rules in place. There are noticeably fewer advertisements and pages load faster. Embedded YouTube videos and Instagram photos don't appear. Sometimes the frame disappears, sometimes you get a "failed to connect" page appearing in a frame in the middle of a page. (Yes, these rules block YouTube and Instagram; they are owned by google and facebook and reside in the subnets owned by those companies.) On a relatively rare occasion, I come across a site using some sort of javascript or css or something hosted by a machine in one of those ASs and that will be blocked. Sometimes the site handles that gracefully, sometimes it stops being functional. A small price to take back your life.

Update: Twitter has trackers on a decent amount of sites out there too, so I've added scripts to block Twitter's AS 13414 as well. Those scripts are in the same directories as the others.

[/musings] [permanent link]

Senator Elbert Guillory
Elbert Guillory, a state senator in Louisiana, has switched his party affiliation from Democrat to Republican. This website has a short commentary on the matter, as well as an embedded video of Senator Guillory explaining his decision.

[/politics] [permanent link]

unHide
After a friend's computer became infected with some malware that hides files in your home directory and tries to extort money from you in order to "recover" your data, I was inspired to write this little program.

All it does is search for hidden, non-system files and unhides them. It defaults to the user's home directory (My Documents), but other directories can be chosen.

If anyone wants to try it out, please do. If you do try it, let me know what parts I can do better. I primarily work on embedded systems and Unix daemons professionally; the user only knows my software exists when it isn't working. As such, I have very little experience with GUIs or human-computer interactions. Any feedback would be much appreciated.

The Windows executable can be found at: http://www.skinnymf.com/~mforde/unHide/. Source code is available upon request.

[/code] [permanent link]

1267567528
6790 test.

--
==================================================================
This mobile text message is brought to you by AT&T

[/mobile] [permanent link]

Writing

"You need strong emotion, whether it's fiery or depressed, an extreme state of mind. I think in any art form it's the case." -- Daniel Ash

Maybe it's my lack of experience. Maybe it's my lack of talent. I tried to sit down and write music for the song known as Ravage in the new naming scheme, but I failed miserably. When I try to force it, like I did tonight, nothing comes out right. I have ideas, I can hear them in my head, but without that inspiration, without that emotion, nothing I produce sounds right.

I've been too happy recently and it's destroyed my creativity. I get the urge, I have the inspiration, to write when I feel negative emotions. I need anger; I need depression. It is in dealing with these emotions that I am able to write.

I have tried several times to force myself to feel this way. This usually buys me a few minutes in which I can write, but it often fails. Because the emotions are artificial, the results are mediocre at best.

I find this situation to be quite frustrating. I want to move forward with this album, but without that inspiration I am unable to do anything.

In the meantime, I'm slowly teaching myself to play guitar and, to a much lesser extent, a keyboard-style synthesizer. I've also been going through materials my music teacher friend gave me to learn some basic music theory. Hopefully once I find that needed inspiration, or find a way to work without being angry or depressed, this new knowledge will make things easier.

[/album] [permanent link]

Revision Control
One could argue that this should be filed under the Unix category, but this post is more about the album than it is about the Concurrent Versions System.

Friday night I created a CVS repository on this server to manage album related files. After discussing it with rskutins, we agreed on several key points.

First, with changes being made a little more frequently than before, it would be best to have some way to track what was going on, and to be able to roll back to a previous version if the changes don't quite work out. Second, we wanted to have a way to organize several files for each song, for instance, lyrics, notes, bass tabs, drum tabs, etc. Last, and maybe the most important reason for the reorganization, we wanted to move away from the numbering scheme that was in place. Each song was numbered from 0 to 17. This was fine until we realized 11 was likely to be the first track on the album.

Now the album is stored in a CVS repository. This will keep a version history of each file, allow us to simultaneously work on parts of the album, and merge our changes.

Within this repository we now have a tree structure where each song has its own directory. The directory will hold any and all files related to that song. In an effort to move away from the numbering scheme, an arbitrary naming convention was mutually agreed upon. The songs are now known by names such as Soundwave, Ravage, Frenzy, and Rumble.

The album is starting to come together. I feel motivated to work on it and recently I've found myself inspired to write. Now if only I had time.

Omlette listened to the Accidental Mix I posted (of the song now known as Soundwave) and gave me some feedback.

It sounded ominous. I don't know how else to describe it since I'm not familiar w/ either artist. Oh wait. Were you mixing your own stuff?

Ominous seems like it could be a good thing given the current direction of the album.

If anyone else takes the time to listen to it, I'd appreciate any comments or suggestions. If you don't have it, my contact information is on this page.

[/album] [permanent link]

Another Demo Update
Two weeks! Ha! It's been closer to two months.

A few days ago I had some time so I sat down with the ProTools set up again. After considering some advice from jlight, I decided to record a second track of the bass line. I decided to use my Yamaha for the second track, as I had used my Fender for the original recording back in June. The two instruments have different characteristics in their sounds and the two playing together seems to add a "fullness" to the sound.

So all I had to do was record 24 seconds of bass and put together a mix. This should take, what, 15 minutes? It took 45 just to record. Once again ProTools repeatedly crashed. When it wasn't crashing, it would report an error and stop recording. Does anyone know if there are updates for ProTools LE 7.1 that will fix this issue? As it stands now, I can't run ProTools for more than a few seconds without disabling multi-core support on my CPU. I have multiple processors. It is a multi-threaded application. It should run better... But I'll save this for that upcoming ProTools rant I keep promising.

Anyway, after about an hour and fifteen minutes, I got two mixes complete. One of them was accidental and sounds, "interesting." The other is closer to what I had in mind. While I wait for feedback on the actual mix from certain people, everyone is free to enjoy the accidental mix found here.

If anyone actually listens to it, I'd be happy to accept any comments and criticism.

[/album] [permanent link]

Demo -- Update
Rskutins recorded his drum part and sent it to me via the wonders of TCP/IP netowrking. On Friday night I finally had enough time (and motivation) to start recording.

I spent a lot of time fighting with ProTools. It repeatedly crashed. Often, when it didn't crash, it simply stopped recording and reported that an error had occurred. I'm remembering this for the ProTools rant that will be coming in the future.

After 45 minutes I had recorded about 6 seconds of vocals and the 24 second bass line. The next block of Copious Free Time(TM) I have, I'll begin the rough mix of the three parts. Hopefully ProTools won't crash as often during that phase.

With any luck, it'll be mixed in the next week or two.

[/album] [permanent link]

Demo
In the next few weeks we are going to attempt to record and roughly mix a demo of a short track which will serve as an introduction to the album.

Currently known as 11, it is a very short piece in 4/4 time at 80bpm. It is in the key of B minor and the spoken words are taken from a quote attributed to Nietzsche.

What upsets me is not that you lied to me, but that from now on I can no longer believe you.

This short demo will hopefully get me motivated enough to put more time into the album.

More information will be posted when it becomes available.

[/album] [permanent link]

A Brief History
Last Summer, my friend, rskutins, and I decided we were going to write an album. He got out his drum machine, being smaller and easier to store and carry than a full kit, and I got out my bass and we started putting together some pieces that were... not good.

We had little direction, I was afraid to play things outside of my comfort zone, and we had some problems communicating. This project quickly fell apart, but we never completely gave up the idea.

In March I found the inspiration I needed. I talked to rskutins and we started working on an album again. This time, fueled by strong emotion, both fiery and depressed, I started by writing lyrics.

Not all are complete, but there are about 15 sets of lyrics for us to use as a starting point. Rskutins has tweaked the lyrics in some places to make them fit a better rhythm while still maintaining the intent of the words. I am quite pleased by what he has done.

Based on these lyrics we have begun writing short pieces here and there when we feel inspired. Rskutins has laid down some pretty good beats to start with. I've been attempting to learn some basic music theory and trying to apply those ideas to the layers on top of what rskutins has written already.

And that's where we are now. Still learning, still writing. Our day jobs have slowed down our progress considerably so it could very well take until the Autumn before we're ready to record and mix the album.

[/album] [permanent link]

It's gotta be the shoes
Yesterday I picked up the pair of shoes in which I will run the New York City Marathon.

[/running] [permanent link]

Optical Illusion
I saw this today. I thought it was interesting.

[/musings] [permanent link]

WTF?
I'm used to guitarists mocking the bass and bassists. It doesn't bother me too much. But this... This irritated me. A lot.
Today at work there was a group of people talking about Rock Band and Guitar Hero 3. None of them actually know how to play intstruments but they claim to be great at these games. They seem to believe this entitles them mock bassists.

• "Oh man, bass is so easy. It's the guitar that's the hard part. Yeah, I'm on expert on the guitar."
• "Yeah, bass is so stupid."
• "So It's me, my brother, and my sister. I play guitar, he's on drums, and my sister sings."
  "what about bass?"
  "My friend just got Guitar Hero 3. I'll make him play bass."
  [Both laugh]
• After making statements indicating this person believes he actually is better than Tom Morello, "After you make Tom Morello or Slash your bitch, they play bass for you."

[/musings] [permanent link]

chdir(2)
So today at work another developer many years my senior, with many more years experience than I, came to me with a Unixy problem.
"When I have a program, how can I have it so the current working directory for all processes it starts isn't the one that it started in?"
"chdir."
"No, I want so that if this process starts something like ls, when ls stats 'dot' I want 'dot' to be the directory that process wants it to be, not the directory that process was started from."
After about 15 minutes of me suggesting chdir while he said that's not what he wanted but then describing chdir, I finally wrote something along the lines of the following

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int
main (int argc, char *argv[])
{
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/tmp");
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/etc");
  system("/bin/pwd");
  system("/bin/ls");
  chdir("/");
  system("/bin/pwd");
  system("/bin/ls");
  return 0;
}

I compiled that, ran it, showed him the output. He said, "Yeah, that's what I want to do."
I showed him the code.
"chdir does that?"

[/unix] [permanent link]

Alpha
Due to the power failure, there was the loss of several hours of work. Last night I installed FreeBSD 6.2-RELEASE on an old DEC AlphaStation 200 I have. I had started building a new, smaller kernel for it around 23:30 last night. It had not completed by the time of the power outage. I have restarted that build.
Any one reading this would reasonably ask, "Why are you not as confused/angry/annoyed with a compile that was not finished in 7 hours as you were about one that took 3 hours?"
The answer is simple. This AlphaStation is powered by a 100MHz DEC Alpha EV4 CPU and has 64MB of RAM. To the best of my knowledge, DEC made this machine around 1994 or 1995. I expected the build to take a long time; the machine is around a dozen years old.

[/unix] [permanent link]

How long does it take to build a linux kernel?
It has been a number of years since I built a linux kernel. Slackware 9.1 was the last GNU/Linux distro I used before switching back to BSD. Tonight I put together a machine from some old parts (1.2GHz celeron with 256KB cache, 256MB RAM, 20GB hard drive) and installed Slackware 12. I customized a kernel configuration and attempted to build it. I don't remember the 2.4 kernel taking as long to build as this 2.6 kernel. It took nearly two hours. Granted, this machine is fairly old, but 2 hours? After I complete the tasks for which I needed this setup, I'm going to install an older Slackware with the 2.4 kernel and build that. I may also install FreeBSD and NetBSD and build their kernels. I'd like to get an idea how long it takes to compile other kernels on this rig.

[/unix] [permanent link]

Volunteers Needed
The Lincoln Park Triathlon needs volunteers. If you'd like to help out, please visit www.lincolnparktriathlon.com/volunteers for more information.

This event isn't possible without the help of volunteers. If you or anyone you know would be interested in helping, please contact us.

[/musings] [permanent link]

"Why the hell don't the plugins have proper documentation"
I had to pick up something in Fair Lawn for a friend this evening. It was later in the evening, well after rush hour but there was still a good amount of time before the sun went down so I decided to take the DeLorean out.

I got her out on Rt 80 and she handled beautifully. The turns on the entrance and exit ramps felt better than in my Pontiac. I was a little nervous about over-steering because of the rear mounted engine, but it wasn't an issue.

When I arrived at my destination, I got some looks from a woman walking her dog and some guys across the street working on something in their garage/driveway. I had a bit of an issue getting back on to 80 due to a construction vehicle and an a-hole in a BMW, but everything else was fine. I'm getting much better at driving it.

On the way home at the 80/23/46 interchange a minivan pulled up beside me and beeped their horn. I looked over and they gave me a thumbs up.

It was most triumphant.

[/dmc] [permanent link]

Yet Another Charity 5K
On August 4th I will be participating in Hoboken's 17th Annual 5K Run/Walk Against Crime & Drugs.

Some police officers told me about the run on Tuesday after I finished the Party With Purpose run. They said the money raised would be donated to various Veterans' organizations.

This run in August will be the same course as this week's, a map of which can be found here. I enjoyed the course. It was rather flat (especially compared to the Lincoln Tunnel Run) and there was a nice breeze coming off the Hudson.

I urge any and all of you who will be in the area to participate in the event. More information can be found at Active.com.

[/musings] [permanent link]

St Michael, defend us in battle
Crisis Magazine has a great piece about St Michael and the ongoing spiritual warfare in the world.

[/musings] [permanent link]

Happy Thanksgiving
I'm thankful for my friends and the support structure they provide.
I'm thankful for my family. While they're not always supportive* they're always accepting.
I'm thankful for my freedom, and the men and women protect that freedom.
I'm thankful for running, and the years it's added to my life.
Every Thanksgiving old mike would consume 1350 calories worth of Cool Ranch Doritos for breakfast before gorging at the traditional dinner. I'm thankful old mike's dead.


*Running 50 miles in a weekend is not "running too much."

I felt the need to document all that I cooked today.

• regular stuffing
• stuffing with sausage
• cornbread stuffing (made from corbread I baked early in the week)
• carrots with brown sugar, clove, nutmeg, and cinnamon (bake until awesome)
• steamed broccoli
• asparagus sauteed with garlic and lemon juice
• baked sweet potatoes
• mashed sweet potatoes
• smashed potatoes
• zucchini with pancetta, garlic, and onion
• beer bread (oatmeal stout)
• stuffed mushrooms
• baked macaroni and cheese
• mashed turnips
• sauteed mushrooms
• cheese lasagna
• meat lasagna
• roasted turkey

I think that's everything.

[/musings] [permanent link]

2010 New York City Marathon
One week ago, I ran the New York City Marathon. As noted many times throughout this blog, this race was something I've been working toward since December of 2008. This event was the culmination of nearly two years of hard work and dedication. And it was worth every single mile I've run over the last two years.

At 9:40, the cannon was fired and the marathon started. Within minutes, I was crossing the starting line and running over the Verrazano Bridge. Not only was I running in the footsteps of the current world record holder and the first American to win New York in 27 years, I was running in the footsteps of legends.

About three and half hours later, I entered Central Park for the last few miles of the race. I looked around and had the odd sensation that I was home.

It's difficult to put into words the feelings of that day. Despite having completed three sanctioned marathons prior to this day, crossing the finish line was something I couldn't believe I was actually doing.

It was absolutely amazing.

[/running] [permanent link]

Pre-Race Thoughts
Last Saturday, I sent a letter to the Giraffes mailing list. I've decided to post here.

In March of 2008, Brian told me I was running a 5K with The Giraffes. He didn't ask and he didn't give me a choice. Two days later I got off the couch, got on the treadmill, and started running. Six weeks later I ran my first race with this team. This team saved my life that day.

Nine months later and a hundred and one pounds lighter, I got this crazy idea in my head. I decided I was going to run a marathon. I thought, if I'm going to run a marathon, I'm going to run the biggest marathon in the world. I'm going to run the New York City Marathon.

I did some quick research about how to get in and found the 9+1 qualifying method. A couple of days later, I told Brian I was going to spend 2009 working toward guaranteed entry for the 2010 NYC Marathon. Almost immediately, he sent out an email to The Giraffes saying, "Mike and I are doing this and so are you." I'm paraphrasing, although it was quite close to that.

So on January 10, 2009, five of us piled into the car and drove to Central Park on a frigid Saturday morning and began our journey with the Fred Lebow Classic.

We continued to run, and picked up some new members along the way. Some with an impressive history of ultramarathons, and some just starting out.

Those of us who first set out that day in January reached our goal and qualified for NYC 2010.

At some point we decided we should run a marathon prior to NY, to get an idea of what we were really getting into. We chose Philadelphia, and for several Giraffes that day, it was our first. It was the day we joined the ranks of the one tenth of one percent of the population who can call themselves marathoners.

While training for Philly, I fell in with a group of runners from my hometown and began running with them. At first it was short runs during a 5K training program they were running, but soon thereafter, they began including me in their longer training runs on the weekends. They introduced me to a number of other runners. Eventually I convinced (most of) them to sign up for the Giraffes mailing list.

For the past two years, I've run with these people, the original Giraffes and the runners who have joined us along the way. And through it all, this team is what has kept me going. Through inspiration, through motivation, through friendships, through training runs and races, you've kept me going. You have been my support system.

And now I sit here on the eve of the New York City Marathon, less than 24 hours from the start of the race, less than 24 hours from realizing our goal we set for ourselves so long ago.

To all of you who have been with me for this journey in some way, shape or form... To those who got the team started and pulled me in, to those who saved my life... To those who persevered through qualifying races under grueling weather conditions with me... To those who got food poisoning with me from Macaroni Grill the night before the Scotland Run 10K... To those who got me through the last 5K of Philly... To those who made the 22+ mile training runs a little more bearable at the end... To those who have shown their support in any way they could...

I offer you my eternal gratitude. I would not be where I am today without all of you. I love you all.

One final note. To those of you joining me in tomorrow's running of the New York City Marathon... Kick ass and chew bubble gum.

--
M. Forde
"Running never takes more than it gives back."

[/running] [permanent link]